SVTU-11T ULTRASONIC HEAT METER (S10H Ultrasonic Heat meter, Battery powered)

FOR OF HEAT MEASURING ON APARTMENT HOUSES AND OTHER BUILDINGS WITH HORIZONTAL TYPE OF HEATING WIRING.

Devices measure volume, mass, excessive pressure of water or liquids with solids (not more than 200 mkm).

Accuracy degree – class 1, 2 (depends on performance);
Case material – stainless steel, steel 20;
Connection – flange;
DN – 20 mm – 400 mm;
Powering – battery (3.6 V);
Service life – not less than 12 years;
Warranty – 4 years.

Desription

The device accounts, displays and saves temperature, volume and mass of water. Saving provides in archives (hourly, daily, monthly, yearly). Ultrasonic waves emit in the flow direction and against. Based on time difference volume of water flow calculates.

SVTU-11 Т has a range of features:

Flow meter section made of stainless steel;
Flow sensors made of titan (excludes pollution and accuracy reducing);
There is possibility to produce flow node and temperature sensors for flooded places;
Various packets performance for flow sensors tie-in with pressure to 16 atm;
Standard package includes flanges (or clumping nuts), paronite gasket, fixing. For DN to 40 mm – straight sections (after 40 mm – by request);
Device can provide flow measurement few times per second for accuracy increasing;
Maximum cable length from computer to SVTU-11 Т sensors – 30 m. Maximum cable length to PC – 50 m. It allows to put out the computer from heat point to other place for comfortable working;
We supply devices for Ukraine utilities and abroad.

To get more information about equipment and performance options contact us by phone numbers:

Technical specifications

Measurement unit:	Due the installation you can choose: GJ, kWh, MWh, GCal. Thermal power displayed by units: MW for energy units GJ, kWh, MWh; GCal/h for energy units GCal.
Temperature range of heat carrier	2…150 °C
Temperature difference range of heat carrier	3…150 °C
Environment temperature range of heat carrier	5…55 °C
Pressure PN, kgs/cm2	16 bar
Battery	3.6 V, lithium
Battery change interval	6 years
Data reading	RS232
Display	LCD, 8 categories + text row
Materials	Flow meter section: DN 20 – 150 – stainless steel; DN 150 – 400 steel 20 (stainless steel on request). Computer case – plastic.
Protection degree	Computer case – IP65; Flow meter section – PI 68.
Accuracy degree (by EN1434)	Class 2
Environment degree for device working	"C" by EN1434: • Temperature – 5..55 Cº; • Normal humidity; • Electromagnetic obstacles – class C; • Mechanical workload to computer – low.
Archiving	The device has nest types: Hourly (depth to 1680); Daily (depth to 500); Monthly (depth to 36); Yearly (depth to 16).
Maximum power and flow rates	Accounting of maximum values based on average values for fixed period of time. Possible average interval is from 1 minute to 30 minutes. Archives save maximum value
Temperature sensors	Depends on order.

*The type of flow-measuring section FMS*	*The lower limit of the flow rate q*i, m3/h	*The permanent flow rate q*p, m3/h	*The upper limit of the flow rate q*s, m3/h	*FMS connection*	L mm
DN20	0,06	6,0	8	G 1 B	160
DN25	0,1	10	12,5	G 1 B	160
DN32	0,22	25	32	Flange DN32PN16	180
DN40	0,4	40	50	Flange DN40PN16	200
DN50	0,6	60	80	Flange DN50PN16	180
DN65	1	100	125	Flange DN65PN16	200
DN80	1,5	150	200	Flange DN80PN16	210
DN100	2,5	250	320	Flange DN100PN16	230
DN125	4	400	500	Flange DN125PN16	265
DN150	6,3	630	790	Flange DN150PN16	315
DN200	10	1000	1250	Flange DN200PN16	540
DN250	20	2000	2500	Flange DN250PN16	620
DN300	25	2500	3125	Flange DN300PN16	680
DN350	35	3500	4375	Flange DN350PN16	740
DN400	40	4000	5000	Flange DN400PN16	820