Flow meters

ULTRASONIC FLOW METER SECTIONS ARE EASY TO USE AND SERVICE

Advantages:

Absence of moving parts that increases lifetime service and interval between flow meter verifications
High accuracy of measurement
Possibility to work with aggressive heat carriers
Possibility to measure in heterogeneous environments
Possibility to connect an additional notification module

Description

Ultrasonic flow meters are best solution for industry enterprises. Because of high reliability and accuracy devices are good for commercial accounting on industry enterprises.

Spheres to use ultrasonic flow meter sections:

High-precision measurement of flow, and total volume of product (water, cool, heat);
Food industry;
Chemical and pharmaceutical industries;
Water cleaning and preparing;
Disposal of wastewater;
Engineering;
Construction;
Heating systems, ventilation and air condition;
Automated systems of flow control (with notification about crashes);

Installation site of flow meters sections should be as remote as possible from vibration source, electromagnetic obstacles (pumps, electric motors, compressors, etc). The absence of electric voltage in a pipeline should be ensured (it is about grounding safety circuit). The distance between flow meter section and computer installation location must be minimal. During flow meter section installation outside we recommend to ensure protection against direct precipitation. Flow meter section is used to install in a pipeline rupture. Pipeline section which was selected for tap should be located in horizontal position. In case heat carrier supply passes under pressure from bottom to top it's possible to install section vertically.

Flow meter section always should be installed in the pipeline zone that ensures its filling with water. Because in case there is water absence, devices stop to work and look for error.

To order or get more information contact us by phone numbers:

Technical specifications

Type DN	Sensitivity threshold	Lower border consumption	Transitional cost	Long-lasting cost	Upper limit costs	Borderline cost
Type DN	[m3/h]	[m3/h]	[m3/h]	[m3/h]	[m3/h]	[m3/h]
20	0,03	0,06	6,3	7,9	10	0,12
25	0,05	0,10	10	12,5	16	0,2
32	0,13	0,25	25	31,3	35	0,6
40	0,20	0,40	40	50,0	60	0,8
50	0,32	0,63	63	78,8	90	1,4
65	0,50	1,00	100	125	150	2,4
80	0,80	1,60	160	200	240	3,6
100	1,25	2,50	250	313	360	5,7
125	2,00	4,00	400	500	900	8,8
150	3,15	6,30	630	788	1200	12,7
200	5	10,00	1000	1250	2200	23
250	10	20,00	2000	2500	3500	35
300	12,5	25	2500	3125	5000	51
350	17,5	35	3500	4375	7000	69
400	20,0	40	4000	5000	9000	90
500	31,5	63	6300	7875	14000	141
600	50	100	10000	12500	20000	204
700	70	140	14000	17500	28000	277
800	80	160	16000	20000	36000	362
900	115	230	23000	28750	46000	458
1000	140	285	28500	35625	56000	565
1200	200	400	40000	50000	80000	820