SEMPAL

Manufacturer of modern
energy efficient equipment for metering
and regulation of thermal energy and water

S1H HEAT METER

NEW COLD/HOT WATER ACCOUNTING METER BASED ON BRASS FLOW METERS.

S1H heat meter fits to thermal energy accounting in commercial real estate and other buildings. Ultrasonic working type ensures reliable device exploitation without technical specifications degradation.

  • Accuracy degree – class 2;
  • Case material – brass/ stainless steel;
  • Connection – carving/ flange;
  • DN – 15 mm – 100 mm;
  • Powering – battery (3.6 V);
  • Service life – 16 years;
  • Warranty – 4 years.

Desription

S1H heat meter designed to measure thermal energy on water heating systems and hot water supply. The devices can be used for energy accounting. It is about energy that used for air condition systems cooling and for cold and hot water consumption volume accounting. 

Service life before the battery change is to 16 years. There is appropriate warning on display one-two months before the full discharge. In case there is water absence in a pipeline device goes into energy-saving mode.

A comfortable connection between keyboard and display provided by manufacturer. In case there are not an optical port at hand, data installation and control can be done by using buttons and text line on the front panel. In addition, it can be done by optical port and PC connection to.    

Included in the delivery package:

  • Flow meters - DN15-100. There are made from brass or stainless steel with anti-corrosion coating. There is IP-68 protection degree. - 1-piece;
  • For two-channel meter – 2-piece;
  • Flow sensors – 2-piece. For two-channel – 4-piece;
  • Cables from electronic block to TS-1.15, 2, 3, …20 m increments, or to another flow measuring section;
  • The water meters are identical by overall dimensions to modern European manufacturers. It makes possible to replace water meters without usage of straight sections;
  • S1H electronic block. Case made of plastic. Protection degree – IP-65. – 1-piece;
  • Water meters have a 4-tariff accumulator which is possible to print data for chosen tariff. 

To order or get advice about water meter installation call us by phone:  

Technical specifications

Measurement unit:

Due the installation you can choose:
GJ, kWh, MWh, GCal

Thermal power displayed by units:
MW for energy units GJ, kWh, MWh;
GCal/h for energy units GCal.

Temperature range of heat carrier

2…150 °C

Temperature difference range of heat carrier

3…150 °C

Environment temperature range of heat carrier

5…55 °C

Pressure PN, kgs/cm2

16

Battery

3.6 V, lithium

Battery change interval

16 years

Data reading

Through IrDA head.
Possibility to install additional expansion mode:

  • RS485;
  • Wireless MBus;
  • Wired MBus;
  • RS232.

Display

LCD, 8 categories + text row

Materials

Flow meter section:
DN15-25 brass;
DN32-100 – stainless steel.

Computer case – plastic.

Protection degree

Computer case – IP65;
Flow meter section – PI 68.

Accuracy degree (by EN1434)

Class 2

Environment degree for device working

"C" by EN1434:
• Temperature – 5..55 Cº;
• Normal humidity;
• Electromagnetic obstacles – class C;
• Mechanical workload to computer – low.

Archiving

The device has nest types:

  • Hourly (depth to 1680);
  • Daily (depth to 500);
  • Monthly (depth to 36);
  • Yearly (depth to 16).

Maximum power and flow rates

Maximum rate accounting provide by average value with preset time interval You can install average time interval from 1st to 30 minute during device installation
Archives save maximum value

Temperature sensors

Pt1000, two-wire connection.

 



Type DN

Nomin.
consumption
qp

Min.
consumption
qi

Max.
consumption
qi

Threshold
sensitivity

Limit value
consumption

Loss
pressure
Δp

Joining

Length

 

[m3/h]

[m3/h]

[m3/h]

[m3/h]

[m3/h]

[bar]

 [inch]

[mm]

015А

0.003

0.015

1.5

3

5

0.17

6 И 8

110

015С

0.003

0.006

0.6

1.2

3

0.17

6 У» В

110

020А

0.003

0.015

1.5

3

5

0.1

61В

130

020С

0.005

0.025

2.5

5

7

0.1

0200

0.003

0.015

1.5

3

5

0.1

020Р

0.005

0.025

2.5

5

7

0.1

Фланець 1092

190

0200

0.005

0.025

2.5

5

7

0.1

61В

025А

0.01

0.035

3.5

7

10

0.08

6 IX В

160

025С

0.007

0.035

3.5

7

10

0.08

61ХВ

160

0250

0.012

0.06

6

12

15

0.08

61ХВ

160

025Р

0.007

0.035

3.5

7

10

0.08

Фланець ОШ 1092

260

0256

0.007

0.035

3.5

7

10

0.08

61ХВ

025Е

0.012

0.06

6

12

15

0.1

025Н

0.012

0.06

6

12

15

0.1

Фланець 1092

032Р

0.012

0.06

6

12

15

0.1

Фланець 1092

260

0326

0.012

0.06

6

12

15

0.1

6 IV* В

040Р

0.02

0.1

10

20

25

0.1

Фланець ОШ 1092

300

0406

0.02

0.1

10

20

25

0.1

62В

050Е

0.03

0.15

15

30

40

0.17

Фланець 1092

270

065Р

0.05

0.25

25

50

60

 

Фланець ОІМ 1092

300

080Р

0.08

0.2

40

80

90

 

Фланець Э1М 1092

300

100Р

0.12

0.6

60

120

130

 

Фланець 1092

360

If you need advice from a design engineer, please leave a request!